Accessories for optical microscopes, biological microscopes, medical microscopes, laboratory microscopes, metallography microscopes and stereomicroscopes

Eyepiece adapter fixed ToupTek Photonics FMA037

Binocular attachment for microscope Carl Zeiss Primo Star

The TS-M7 universal calibration slide micrometer object is designed to calibrate a microscope measurement system in a microscopic image analysis program for measuring distances in real units - cm, mm, microns, nm. The TS-M7 micrometer object is used in reflected light and transmitted light. Having taken snapshots of the image of the micrometer scale at each working magnification of the microscope and indicating the known distance in the calibration mode, we can calculate the image scale in real units (micrometer, millimeter, centimeter, etc.).

By measuring microobjects in a smear or in a sample, microscopy is transformed from a visual research method to an evidence-based method.
The micrometer is a transparent glass with two scales applied to it. One micrometer scale with a division price of 0.01 mm = 10 μm is inscribed in a circle with a diameter of 5 mm, the second scale with a division price of 0.10 mm = 100 μm. The dimensions of the micrometer glass are 25.4 mm x 76.2 mm.

Darkfield condensor for working with 20X, 40X, 60X lenses without using immersion oil

This condensor is used to provide the darkfield illumination in Micromed microscopes. It must be used with the immersion oil and 100x objectives only on the Micromed 2 and Micromed 3 microscopes.

The 1x lensless adapter is designed to install digital and analog cameras with a C-Mount in the eyepiece tube of microscopes and provides maximum magnification of micro-objects on the computer screen. Does not reduce image, Suitable for digital cameras with a diagonal of 1/4 ”~ 1” inches. It has a fixed focal length (focusing is not required). Allows you to get the maximum possible magnification from the camera.

Eyepiece adapter FMA050 with a fixed focal length and an increase 0,5x for connecting digital and analog C-Mount cameras to the microscopes.

Eyepiece adapter FTA037 with a fixed focal length and an increase 0,37x for connecting digital and analog C-Mount cameras to the telescopes.

Eyepiece adapter ToupTek FTA050 with a fixed focal length and an increase 0,5x for connecting digital and analog C-Mount cameras to the telescopes. Suitable for cameras with a matrix size from 1/2" to 1/3"

Eyepiece adapter ToupTek FTA075 with a fixed focal length and an increase 0,75x for connecting digital and analog C-Mount cameras to the telescopes. Suitable for cameras with a matrix size from 1/1.8”  to 1”. To cover the field, the sensor size should be smaller than the available size.

This adapter has a fixed focal length (no focus required). If you need a variable focal length adapter, choose from the ATA (Adjustable Telescope Adapter) series.

Eyepiece adapter FMA100 with a fixed focal length and an increase 0,1x for connecting digital and analog C-Mount cameras to the microscopes.

Eyepiece adapter adjustable ToupTek Photonics AMA037

Eyepiece adapter adjustable ToupTek Photonics AMA050

Eyepiece adapter adjustable ToupTek Photonics AMA075

Eyepiece adapter ToupTek ATA037 with adjustable focal length and an increase 0,37x for connecting digital and analog C-Mount cameras to the telescopes. Suitable for cameras with a matrix size from 1/4" to 1/3". The adapter is focused manually.

Eyepiece adapter ToupTek ATA050 with adjustable focal length and an increase 0,5x for connecting digital and analog C-Mount cameras to the telescopes. Suitable for cameras with a matrix size from 1/2" to 2/3". The adapter is focused manually.

Eyepiece adapter ToupTek ATA075 with adjustable focal length and an increase 0,75x for connecting digital and analog C-Mount cameras to telescopes with an ocular tube with a diameter of 31.75 mm. Suitable for cameras with a matrix size from 1/1,8" to 1". The adapter is focused manually.

Eyepiece adapter fixed ToupTek Photonics FMA075

Fit to 1/1.8" ~ 1" sensor

0.75X magnification
Fixed focal length
C-mount to Dia. 23.2mm eye tube

Eyepiece adjustable adapter ToupTek Photonics AMA100 with increase 0,75x for connecting digital and analog C-Mount cameras to the microscopes. Adapter ToupTek AMA100 have a manually focusable lens.

This modernization kit is designed to upgrade a microscope to a digital workstation based on the high-speed digital camera with a high frame rate of the a color matrix Aptina U3CMOS matrix and high-speed USB 3.0 interface.

Сamera Speed ​​up to 14 frames per second and more when using the maximum resolution of 5.1 Мpix 2560 x 1922, which makes it comfortable to carry out a variety of laboratory studies of micro-shooting in experimental and laboratory studies and microscopy of native blood (haemoscanning), while observing the object of study in high resolution.

Our company "Center of Information Technologies "Nelian" has been specially developed program Dianel®-Micro. Dianel®-Micro is a software that connects a microscope and a personal computer through a digital video camera into a powerful workstation and research complex, which is a fundamentally new opportunities doctor during biomaterials and analysis of samples and preparation of a report.

The camera has a universal connection through the C-mount connector and suitable to any microscopes - biological, laboratory, medical, research, stereo, forensic, metallographic microscope for materials science and engineering. If necessary we can find and add a certain optical adaptor to connect the camera to a the microscope

Dianel-Micro Software  is available in English

Digital photography has penetrated all spheres of activity, and, especially in medicine and laboratory diagnosis. In medicine, it is important to have documented evidence of any changes in the patient's condition.

Our company "Center of Information Technologies "Nelian" was specially developed program Dianel®-Micro. Dianel®-Micro is the software that connects Microscope and a Personal Computer through a digital video camera into a powerful workstation and research complex, providing a fundamentally new user friendly features for physician or laboratory assistant in analysis of samples and biomaterials with result conclusion printout.

This universal kit is has a connection through the eyepiece or C-mount connector and suitable for any of the microscope:

Biological microscopes, research microscopes, stereo microscopes, forensic microscopes, laboratory microscopes, microscopes for materials science and engineering, metallographic microscopes.

Microscope upgrade kit to a digital workstation based on a high-speed digital camera. The kit has a high frame rate per second due to the Sony IMX123 CMOS sensor. Due to the large enough size of the matrix, the sensor gives little digital noise.
Speed ​​camera up to 50 frames per second or more when using the maximum resolution of 2048 x 1536, which makes it comfortable to conduct a variety of laboratory tests, survey of microscopic experimental and laboratory studies and microscopy of native blood (hemoscanning) while observing the object of study in high resolution.
Our company "Center of Information Technologies" Nelian" has been specially designed software Dianel®-Micro. Dianel®-Micro is a software that connects the microscope and a personal computer via a digital video camera into a powerful workstation and research complex, with a fundamentally new opportunities for the physician in biomaterials and analysis of samples and preparation of a report.
The camera has a universal connection through the eyepiece or C-mount connector and is suitable for any microscopes - biological, laboratory, medical, research, stereo, forensic, metallographic, microscopes for materials science and engineering ...
Software Dianel-issued in English and is compatible with any operating system Windows 32 and 64 bit versions.

Calibration Slide on schott glass or object-micrometer slide TS-M1 is a Calibration Slide for transmitted light, also can be used for reflected light, Is recommended for biological microscopes, for medical microscopes, for laboratory microscopes, to calibrate measurement system of image analysis software to measure the size on the photos from microscope digital cameras.

Calibration Slide TS-M1 has scale 1 mm with 100 divisions along the X horisontal axe, step 0.01 mm that is equal to 10 microns.
Microscope digital camera becomes a measurement system after calibration and helps to study microobjects that is very important for scince researches to prove the results by real measurements.

The TS-M7 universal calibration slide micrometer object is designed to calibrate a microscope measurement system in a microscopic image analysis program for measuring distances in real units - cm, mm, microns, nm. The TS-M7 micrometer object is used in reflected light and transmitted light. Having taken snapshots of the image of the micrometer scale at each working magnification of the microscope and indicating the known distance in the calibration mode, we can calculate the image scale in real units (micrometer, millimeter, centimeter, etc.).

By measuring microobjects in a smear or in a sample, microscopy is transformed from a visual research method to an evidence-based method.
The micrometer is a transparent glass with two scales applied to it. One micrometer scale with a division price of 0.01 mm = 10 μm is inscribed in a circle with a diameter of 5 mm, the second scale with a division price of 0.10 mm = 100 μm. The dimensions of the micrometer glass are 25.4 mm x 76.2 mm.

Digital photography has penetrated all spheres of activity, and, especially in medicine and laboratory diagnosis. In medicine, it is important to have documented evidence of any changes in the patient's condition.

Our company "Center of Information Technologies "Nelian" was specially developed program Dianel®-Micro. Dianel®-Micro is the software that connects Microscope and a Personal Computer through a digital video camera into a powerful workstation and research complex, providing a fundamentally new user friendly features for physician or laboratory assistant in analysis of samples and biomaterials with result conclusion printout.

This universal kit is has a connection through the eyepiece or C-mount connector

The kit allows you to create a compact veterinary microscope from any trinocular microscope. The set is assembled on the basis of a color digital camera with an HDMI output and a high-quality 11.6-inch Full HD LCD display. The display is based on a matrix with IPS technology TFT, which guarantees comfortable viewing angles and high contrast images.
Thanks to this set of components, we obtain a high-grade digital microscope occupying a very small area in the workplace. It allows you to work comfortably on a microscope even in confined spaces, even for two employees at the same time.